Stampin Friends March 2023 Blog Hop - Monochromatic March

Welcome to the Stampin Friends Blog Hop!

It’s March Madness and we are going mad over monochromatic card designs!

March’s theme is monochromatic, and I know I say this every year, but boy do I have a hard time with it.  However, this year I think I nailed it.  My color of choice is an In Color that will be discontinued in a few short months, so be sure to stock up on your favorites.

If you are following along the hop, you have arrived from Steph’s blog. Be sure to read through my blog, comment below and continue to Barb’s blog.

If you get lost along the way, no worries, you can find a list of Blog Hoppers at the end of each Blog. ENJOY!

 

Have you all seen this new technique? Some people call it Floating Element Technique while others call it Floating Stripe Technique.  No matter what you call it, it is so much fun to do and believe it or not VERY EASY!

 

 

 

 

 

MATERIALS NEEDED

Stamp Set: Silly Goose

Paper: Basic White CS (5 ½” x 8 ¼”, scored at 4 ¼”; 2 ¼” x 5”; scraps)

Fresh Freesia CS (5 ¼” x 4”; 2- ¾” x 4”)

Window Sheet 4” x 4”

Dandy Designs DSP (2 – ¾” x 4”; 1- 2” x 4 ¾”)

Ink: Fresh Freesia; Momento Black

Tools/Accessories: Circle Dies, 1 3/8” Circle Punch; Basic Pearls; Loose Flower Flourishes  

1. First, fold in half the card base and adhere the 5 ¼” x 4” fresh freesia cs to the front.
2. Adhere the 2” x 4 ¾” DSP onto the 2 ¼” x 5” basic white cs.  Adhere this to the card front with dimensionals towards the left-hand side.  Be sure there is equal spacing on the top, bottom and left-hand side.
3. Adhere the strips of card stock and dsp onto the window sheet.  Leave equal distance between each strip.
4. Die cut a circle out of the window sheet lined with the strips of card stock and dsp (On my card, the circle is 3 ¼”).  Adhere this to the card front with dimensionals.  Half the circle covers the strip while the other half adheres to fresh freesia cs.  Because one layer is higher than the other, I applied two layers of dimensionals to the side going on the fresh freesia cs.
5. Next, I stamped the sentiment on basic white cs with momento black ink and punched it out with a 1 3/8” circle punch.  This gets adhered to the window frame circle.
6. Lastly, I embellished the basic white circle with some basic pearls and loose flower flourishes.
7. I also stamped the inside of the card with the first bumping geese.  I thought this was a nice touch to lift the spirit of the recipient of the card.
   
    

   
   

   
   
   

I really enjoyed putting this card together and can’t wait to showcase this in my next card class! It looks difficult but trust me, it was easy peasy!  I hope you enjoyed this month’s blog post!!  Comments of any kind (well hopefully nice ones, lol) are greatly appreciated.  When you are done be sure to hop on over to the next blogger, Barb on the list!

 See you next month!

______________________________________________________

 

_________________________________________________________________

 

Below are some of the products used:

 

 

 

 

 

        

 

 

Stampin Friends February 2023 Blog Hop - Fabulous Fun Fold & 3D Project

 

Welcome to the Stampin Friends Blog Hop!

Happy Valentines Day all!  I know it’s a bit late, but there is no time limit or day to say “I Love You” and I love you all for being here!

For February we decided to showcase some fun fancy fold cards and a 3D project.  My projects focus on St. Patrick’s Day.  I find this very comical, because with a name like mine (Tiziana Milano), there isn’t an ounce of Irish in me. But I love gnomes and thought this would be fun to do.

If you are following along the hop, you have arrived from Steph’s blog. Be sure to read through my blog, comment below and continue to Jo’s blog.

If you get lost along the way, no worries, you can find a list of Blog Hoppers at the end of each Blog. ENJOY! 

      

There are so many fun and fancy fold cards out there that is was very difficult to just choose one, but I finally did.  Today I will be showing you the fun fold technique called Latch Fold.  I had so much fun putting this together and even more fun creating the 3D project which can hold some gold nuggets!  In this case that means "Rolos"

 

MATERIALS NEEDED

Stamp Set: Celebrate Sunflowers, Lucky Clover

Paper: Granny Apple Green CS (5 ½”x6 ½”:card base, scored at 4 ¼” and 3 ½”x3 ¼” scored at 2 ¾” along the 3 ¼” side.)

Basic White CS (2”x 5 ¼”, 2 ½”x3 ¼” and 4”x5 ¼”, plus scraps)

Very Vanilla, Soft Suede, Smokey Slate and Dandy Designs DSP (scraps to make the gnome)

Mossy Meadow 5 ½”x8 ½”

Ink: Garden Green, Granny Apple Green, Grey, Parakeet Parade, Momento Black

Tools/Accessories: Gnome Dies, Curvy Keepsake Box Thinlits Dies (R), Clover Punch 

1. First, I stamped the smaller sunflower image from Celebrate Sunflowers onto the 2 ½”x3 ¼” and 4”x5 ¼” basic white cs. I then stamped the band of clovers from Lucky Clover in parakeet parade to fill in the white space. Set the larger piece aside and adhere the smaller piece to the granny apple green cs, set this aside as well.
2. I stamped the larger sunflower image on the 2”x 5 ¼” piece of basic white cs. Again, filling in the white space with band of clovers in parakeet parade. This is then adhered to the lefthand flap of the card base.
3. Adhere the folded edge of the small granny apple green cs layer to the back side of the basic white cs (be sure it is secured to the right hand side), then adhere this to the inside of the card base.
4. Die cut the gnome pieces in the colors shown in the image. Stamp the large clover in garden green ink, punch out and adhere to the gnome.  This all gets adhered with dimensionals onto the smaller flap.
5. The last step I did, was stamp the sentiment inside the card. I stamped “Happy St. Patrick’s Day!” on a strip of basic white and adhered it to the left hand flap. I also stamped a few of the clovers from the stamp set.  I fussy cut them out and embellished the outside and inside of the card.
6. The very last thing I did, is add whink of stella to the gnomes hat.

  

My 3D project cooridnates with the greeting card and can be filled with rolos chocolates to fit the theme.  I was surprised how easily this went together, although I do have to admit, I need to work on my cone making skills.

  



1. The base is a curvy keepsake box using mossy meadow
   cs.
   
2. The gnomes hat is a cone made out of Dandy Designs DSP and embellished with more clovers from Lucky Clover stamp set.   
3. I then pieced together another gnome and adhered him to the keepsake box.
4. There is nothing I dislike more than seeing people rip apart the treat holders I make just to get to the sweets, lol.  So what I did to preserve the box is I made an "arm" out of DSP connecting the hat to the keepsake box. Half of the "arm" is attached to the inside of the hat and the other half to the keepsake box.  This is place at the back of the box.  This way, they just need to flip up the hat to get at the chocolates.  

I hope you enjoyed this month’s project, I can’t to show you what I have in store next month!!  Comments of any kind (well hopefully nice ones, lol) are greatly appreciated.  When you are done be sure to hop on over to the next blogger on the list!

See you next month!

_____________________________________________________________ 

 

Here are some products used for my projects.  There are just a few days left to get your hands on the Dandy DSP.  This is a FREE Sale-A-Bration item when you spend $100 in Stampin' Up!'s catalogs. 

Here is February's Hostess Code: Z9YQ4MUX !!!

Be sure to use this code at check out or click this link to shop our website with my hostess code(https://www.stampinup.com?hostcode=PHJJB9KE). If your order is less than $150. This will put you in the Hostess Rewards Raffle at the end of the month!

 

 

 

 

 

Stampin Friends January 2023 Blog Hop - Life's Special Occasions

 

Welcome to the Stampin Friends

Blog Hop!

Happy NEW Year!!!!  Welcome all to 2023!!  How are your new year’s resolutions going??  I don’t “do” resolutions, but I do mentally tell myself every year I will not procrastinate on my projects like I have in the past.  Yeah, you see where I am going with this, lol. 

 

Any hoot let’s get to the real reason for this blog post…it’s time to get our Stampin’ on!  We are starting this year’s blog hop with “Life’s Celebrations”.  This is a perfect topic to start with because we all know there will be all types of Celebrations throughout the year.  With this post you will have endless ideas for all your Occasions!!

If you are following along the hop, you have arrived from Stephanie’s blog. Be sure to read through my blog, comment below and continue to Jo’s blog.

If you get lost along the way, no worries, you can find a list of Blog Hoppers at the end of each Blog. ENJOY!

 

The Life’s Celebration I chose to focus on for this blog post is a 50^th Anniversary!!  My Aunt and Uncle are celebrating 50 years of marriage this weekend and what a better way to present them their gift, than with a handmade greeting card.  Please accept my apologies in advance, I have used some retired products for this but the focus of the card does use NEW, beautiful designer series paper from Stampin’ Up!’s Sale-A-Bration Catalog.  I have been trying to be “good” by not buying EVERYTHING all at once from Stampin’ Up!’s new catalog.

MATERIALS NEEDED

Stamp Set: Always in my Heart (R)

Paper: Basic White CS (8 ½”x5 ½”, 4 1/8” x 5 3/8”); Shimmer White CS (scraps); Dainty Flowers DSP (Oval Image portion)

Ink: Versa Mark, Gold Embossing Powder

Tools/Accessories: Gold Simply Elegant twine, Square Vellum Dollies (R), Bough Punch, Old World 3D Embossing Folder (R), Large Numbers Dies (R)   

I tried my hand at lots of layering with different pieces.  I find these cards so impressive.  I think I did OK with it, but believe I still need to work on a few things.

1. My card base is Basic white, I then layered another piece of basic white cardstock embossed with Old World 3D folder.
2. On top of this I place the beautiful oval design of Dainty Flowers DSP. 
3. For my next layer, I punched out some pieces using the Bough punch out of shimmer white paper, followed by a vellum dollie.
4. Next , I used a piece of gold simply elegant twine around the edges of the card and finished it off with a small bow.
5. The sentiment which is the cards focal point “Happy 50^th Anniversary”, was using gold accents.  The 50 is die cut out of gold foil paper and the sentiment was made using gold embossing powder on shimmer white cardstock.

 

I hope you enjoyed my first project of year!  I am looking forward to sharing a lot more with you this coming year!!  Comments of any kind (well hopefully nice ones, lol) are greatly appreciated, of any kind and then when you are done be sure to hop on over to the next blogger on the list!

 

See you next month!

 

 

Blog Hop Index

__________________________________________________________________ 

Below are some of the products used in my card design.

 

   

 

 

Stampin Friends November 2022 Blog Hop - Tags, Boxes & Bags!

Welcome to Stampin Friends Blog Hop! Can you believe we’ve been on this Hop journey for a whole year!!!  Yes, this is the last one for 2022, but don’t you fret none, we will be back in 2023!  For our final Blog Hop we are going the festive route with Tags, Boxes and Bags, since December is such a festive month throughout the world.

If you are following along the hop, you have arrived from Jo’s blog. Be sure to read through my blog, comment below and continue to Teri’s blog. If you get lost along the way, you can find a list of Blog Hoppers at the end of each Blog.
ENJOY!

This year I tried to do as many Hops as possible geared towards masculine and kids…so today’s no different.  This month I made a greeting card along with a “Filing” box that will hold gift tags.  The box is super easy to make and hold just about anything, not just gift tags!  Check it all out below.


Here is a quick list of materials that used to make all the projects:

Yeti to Party (bundle)
North Pole Mischief
Layering Diorama Dies
Story Book Gnomes Designer Series Paper
Basic Grey Card Stock
Smoky Slate Card Stock
Basic White Card Stock
3/16” Iridescent Trim
Snowfall Accents Puff Paint
Momento Black Ink
Balmy Blue Ink

The card is a simple design, I gave the layering diagram a whirl and am pretty happy how it turned out.

Greeting Card:

Card Base: basic white card stock, 8 1/2 x 5 1/2 scored at 4 1/2”
Inside Layer: basic white 4 1/8’ X 5 5/8”
Scraps: basic white

I used one of the layering diaroma dies to cut a whole in the front of the card.  I outlined this with the snowfall accents puff paint. I then took a piece of 4 1/8” x 5 3/8” basic white card stock and stamped some snowflakes and added the mountains.  I also used the snowfall accents puff paint on the mountain tops.

I then stamped a yeti and a tree, colored and trimmed them out and added them to the card front.
Lastly, I die cut a scarf for the yeti out Story Book Gnomes DSP.  I also used this DSP for the sentiment.

Files Box and Tags

The tags are 2” x 4 1/4” card stock (basic grey and smoky slate) with a layer of the Story Book Gnomes DSP the size of 1 3/4” x 3 3/8”.

To decorate the tags I used the Yeti image, along with the two images from the North Pole Mischief. (SHHH it is one of my favorites sets).  Aren’t they just so freakin’ cute!

 

 

The File Box I used the directions on splitcoaststampers.com.  You can find them here: https://www.splitcoaststampers.com/resources/tutorials/minifilebox/  It was super simple to make especially if you have the envelope punch board.  I wrapped the iridescent trim around the box two times and stapled the ends to the box front.  The trim edges were covered with the Yeti, mountains and presents.

I hope you enjoyed all of my projects for 2022, can’t wait to be back next year!  Don’t forget, comments of any kind (well hopefully nice ones, lol) are greatly appreciated. When you are done here be sure to hop on over to Teri’s Blog.

See you next year!
______________________________________________________________________

Stampin Friends October 2022 Blog Hop - Thankful for You!

Welcome to Stampin Friends Blog Hop! This month is we are creating for being "Thankful for You". First, I am thankful for all of you and happy I can share my creativity with you all! Second, I am thankful for all medical research facilities looking for cures!  One in particular is the Leukemia & Lymphoma Society.  I am raising much needed funds, so please be sure to visit my "other" page after the hop.

If you are following along the hop, you have arrived from Jean’s blog. Be sure to read through my blog, comment below and continue to Steph’s blog. If you get lost along the way, you can find a list of Blog Hoppers at the end of each Blog.  ENJOY!

I know I said in previous posts, but I am still trying to make more masculine cards and gifts.  So this month was no different!  Shouldn't we be "Thankful" for our men in our lives?  I also included one of my favorite things this month, pens.  If you know me, you know I LOVE pens and kind of collect them.  The one featured in the box I made was purchased this Summer in New Orleans!  Now onto my items!

 

I found this fun card idea somewhere on Pinterest, please forgive for not knowing who it was.  Since I found this, I have made sure to include in a class, for a birthday card and now this blog.

Products used: Brewed For You Bundle; Color & Contour; Very Vanilla Card Stock (CS); Basic White CS; Early Espresso, Slate  & Crushed Curry Ink; Twine; Rustic Metallic Adhesive Backed Dots; He's the Man Designer Series Paper (DSP).

      

 

 

 

The card is a normal A2 (4 1/4" x 5 1/2") size, however you cut 2 inches off the front flap.  Then you take a piece of 3" x 5 1/2" acetate to fill in where you cut away. Lastly, I added a border to the right edge of the acetate to finish off the "window".  Inside the card I stamped my sentiment, but heck you can stamp anything you want to see through the window.  Below is a card I created for one of my recent classes where we made Fall cards.It was a big hit!

 

 

Now for the really fun part!  We always seem to make cute packaging to hold sweets.  Well this time I thought I would something to hold a "fancy" pen.  Wouldn't you love to be gifted a nice pen?  I know I would.

The bottom of the box is made with He's the Man DSP and cover (which is hard to see in the picture) is made with a piece of acetate.  The finished box is 6" long, by 3/4" high and wide. I wanted a clear cover so the pen would be visible.  The measurement for the base is 9" x 3 3/4". At the 9" side, score at 3/4", 1 1/2", 7 1/2" and 8 1/4". On the 3 3/4" side, score at 3/4", 1 1/2", 2 1/3" and 3".  Then you will trim away the pieces as soon in the picture below.

 

 

I put the base together similar to the boxes Stampin' Up! often has up for sale or in their Paper Pumpkin kits.  Mine did need a little adhesive. I didn't think to add a picture as to how it went together so I may update this post to include it over the weekend.  

 

I'll admit, the acetate cover was not easy to put together, due to the fact you cannot see the score lines and it is super thick.  The cover's measurement is 7 1/2" by 2 1/5".  On the 7 1/2" side score at 13/16" on each end and 7/8" on each side of the 2 1/2".  I did not cut away any pieces for the cover. All you need to do is on the 2 1/2" side, cut on the score lines to the score line going the other way.

 

 

 

 

I ties some twine around the base so it really holds its shape and then the cover tucks nicely inside the box.

I also created an insert for the box the hold the pen.  This piece is 3/4" x 8 1/4". I made some score lines and then punched out a three quarter circle at the peaks of the scores to create a cradle for the pen.

 

 

 

Here is the final box, along with a tag to go with it.  I hope you enjoyed my “thankful for you” projects! Don’t forget, comments of any kind (well hopefully nice ones, lol) are greatly appreciated. When you are done here be sure to hop on over to Steph’s Blog.

 

 ______________________________________________________________________

______________________________________________________________________