Stampin Friends June 2022 Blog Hop - Lots of Layers!

 Welcome to Stampin Friends Blog Hop! This month we are featuring cards and projects with lots of layers. This is a good way to use up all those pieces of scrap Designer Series Paper (DSP).

 If you are following along the hop, you have arrived from Sue’s blog. Be sure to read through my blog, comment below and continue to Teri’s blog. If you get lost along the way, you can find a list of Blog Hoppers at the end of each Blog.
ENJOY!

MATERIALS NEEDED:
Basic White Cardstock
Bermuda Bay Yardstick
DSP of your choice (I used Sunshine & Rainbows 6”x6” DSP from the Jan0Jun 2022 Sale-A-Bration brochure)
Momento Black Ink
Party Puffin Stamp Set
Stitched Rectangle Dies
Colored Pencils
White Twine

Have you all seen this freakin’ cute stamp set, Party Puffin in Stampin’ Up!’s Annual Catalog??  I just love it!  I’ve had it for a bit and finally decided to use it for this Hop.  I hope you love it as much as I do after seeing what I was able to make with it!

 

For my card, I find that now I love doing fancy folds.  So today I have another fancy fold card for you, along with lots of layers.  This fancy fold card is called Fold Back Pop-Up card.  Full instructions can be found on splitcoaststampers.com by Robyn Rasset.

Here are the sizes of cardstock and DSP used.  It is best to coordinate and prepare these pieces ahead of time.

• Cardstock base: 8 1/2" x 5 1/2", scored at 2 1/8" and 4 1/4"
• Patterned paper #1: 2 pieces 5 1/4” x 1 7/8”
• Patterned paper #2: 2 pieces 2”x 2” cut in half diagonally
• White cardstock: 2 pieces 1 5/8” x 1 5/8”
• White cardstock: 2 pieces 2 5/8” x 2 5/8”, cut 1 in half diagonally
• Coordinating cardstock: 2 pieces 1 3/4”x 1 3/4”
• Coordinating cardstock: 2 pieces 2 3/4" x 2 3/4”, score 1 on the diagonal and cut off 1” of tip parallel to scoreCard base is basic white cardstock, 8 1/2” x 5 1/2”, folded in half to become 4 1/4” x 5 1/2”.

The following instructions were taken right from splitcoaststampers.

1. Open the card flat and adhere patterned paper #1 to the left side, centered between score lines. Adhere the patterned paper triangles to the corners on the right side.
2. Adhere the 2 3/4” cardstock square centered between the triangles.
3. Stamp the images onto the white cardstock with the squares in diamond orientation.
4. Color the images and prepare any other embellishments for your design.
5. Adhere the colored images to cardstock layers.
6. Adhere greeting layer to card.
7. Without adhering, lay the images in place as a test for placement.
8. Add strong adhesive to the scored tab. Hold in position. Close card onto the adhesive.
9. Position the tip of the first small square at the corner of the patterned paper on the front. Add adhesive only to the left side. Repeat with the bottom square, lining up with the bottom corner of the patterned paper.
   

To go along with the card, I created a gift pouch to hold a bottle of doTerra hand sanitizer.  I think the one thing this pandemic has instilled in us, is the use of hand sanitizer to keep germs away.  This cute pouch has a window so you can see the contents and it is very easy to open, without destroying the packaging.  Did I mention, these make great end of year or beginning of year teacher gifts too!

Measurements for the pouch are as follows.

• 8 1/2” x 7 1/2” cardstock
• 2, 1 1/4” x 5 3/4” DSP
• 1 7/8” x 3 1/2” acetate.

 

 

Here are some quick instructions on how to put your pouch together.

1. Score the 8 1/2” x 7 1/2” piece of cardstock at 2”, 3 1/2”, 5 1/2”,7”, then score 1 1/2” on the other side. (see image)
2. Snip all of the score line up to the 1 1/2” score.  Then trim off the last square that measures 1 1/2” x 1 1/2”.  
3. Add tear tape to the flap where you removed the square. (see image) Be sure to put a piece close to the score line and the edge of the cardstock. Adhere this to the other side to create a rectangle box.
4. Carefully, place rectangle die in the wider center panel.  Carefully fold over from the score line on top of the die. (This was the only way I could get it through my die cutting machine).  It will leave an indent but this will be covered by the DSP.  Using tear tape I adhered the piece of acetate to make my window.
5. Adhere the 2 pieces of DSP on the 1 1/2” wide panels.
6. Add adhesive the smaller flaps at the bottom to close up the box.  Now you have a pouch/box that will stand up.
7. To finish off the pouch, I pushed in the narrow sides and gave it small pinch so it folds.  
8. I punched of piece of DSP from a fancy label punch (retired, sorry).  I folded this in half.  I adhered half to the back of the opening.  I then folded it over and punched to holes so I can string some twine to hold the pouch closed, yet making it easy to open to remove the contents.
9. Lastly, I decorated the pouch by stamping a puffin and cake on scraps of white cardstock, colored, fussy cut and adhered to the front of the pouch.

I hope you enjoyed my lots of layers card and project!  

Don’t forget, comments of any kind (well hopefully nice ones, lol) are greatly appreciated. When you are done here be sure to hop on over to Teri’s Blog.
See you next month!

___________________________________________________________

Stampin Friends May 2022 Blog Hop - Celebrating Men!

 

Welcome to Stampin Friends Blog Hop! This month we are celebrating men which is just fitting because next month we celebrate Father's Day here in the states.

 If you are following along the hop, you have arrived from Steph’s blog. Be sure to read through my blog, comment below and continue to Melissa’s blog. If you get lost along the way, you can find a list of Blog Hoppers at the end of each Blog.

ENJOY! 

I know most of us have a hard to buying for the men in our lives, so we tend to give giftcards.  My project this month makes giftcard giving much more fun!

I am using the product suite "He's the Man" from Stampin' Up!  Once again they have out done their self.  The suite includes everything you need to make masculine cards and 3D projects.  Here are mine!

Greeting Card:

SUPPLIES: Early Espresso Card Stock; Crushed Curry Card Stock; He's the Man 12"x12" Specialty Designer Series Paper (DSP); Rustic Metallic Adhesive Dots

INSTRUCTIONS: Like I said Stampin' Up! really out did themselves and this time they did it by having one of their printed DSP sheets already laser cut.  There are a ton of pieces that can be used to quickly put a greeting card or scrapbook page together.

• Card Base = 8 1/2" x 5 1/2" early espresso card stock
• First Layer = 4" x 5 1/4" crushed curry card stock
• Second Layer = 3 3/4" x 4 3/4" camper print DSP checked print visible; 2 pieces of 1 1/2" x 3 3/4" camper print DSP with camper print visible.
• Lastly I did die cut the crushed curry "banner" to add to the cluster in the center of my card.  The circle piece and arrow is one of the laser cut pieces that comes in the DSP.  And yes I blinged a masculine card with rustic metalic adhesive dots.

Smores Themed Gift Card Holder:

SUPPLIES: Soft Succulent Card Stock; He's the Man 12"x12" Specialty Designer Series Paper (DSP); Cajun Crase Card Stock; Rustic Metallic Adhesive Dots, Twine

SIDE NOTE: Please ignore the "seasonal" marshmallow peeps (lol).  

 

I thought I would disguise a gift card for my 3D project.  I think getting a gift card in your greeting card or one of the provided envelopes is soooo boring!  So here is an alternative way which can be replicated for anyone in your life. It's a mini smores kit that includes the gift card in the reusable waterproof case!  Just an FYI, you can buy the water proof case at most out doors shops.

 

INSTRUCTIONS: 

• For the case I removed the insert and used it as a template which I traced onto a piece of DSP. The piece of DSP used is approximately 6" x 4".  I then scored in the same spots as the "template" so it would slide into the case as the original insert.

                    

• For part of the "smores" kit, yes I used a snowman peep for the marshmallow and scooby snacks for the graham crackers (these are my favorite)!  I placed them in a cello bag and tied the top with some twine.  I then used one of the pieces from the laser cut sheet in the "He's the Man" DSP to decorate the cello bag.  
  

           

• If you have the mini Hersey bars you could add them to this kit.  I only had the large bars on hand so I made a pouch to hold it. You could "hide" the giftcard in this pouch also. 
• To make the pouch I used a piece of 5 2/2" x 6" DSP.  It is scored at 1 5/8" on either side when holding the piece of DSP landscape.  Then scored at 1/2" on one side when holding the piece of DSP portrait. Then I trimmed as shown in the image.
• Then you just place adhesive on the tab and on the flap to close up the pouch.  You can punch a circle or die cut a shape at the top of the pouch to expose more of the chocolate bar.
• Once again I used some of the pieces from the laser cut sheet of DSP, I die cut the banner out of soft succulent card stock and stamped the "compas" image in early espresso on the cajun craze DSP.  I then added this to the pouch with some twine.
  

         

 I hope you enjoyed my Celebrating Men card and 3D project!  Don’t forget, comments of any kind (well hopefully nice ones, lol) are greatly appreciated. 

When you are done here be sure to hop on over to Melissa’s Blog.         See you next month!

Blog Hop Index

__________________________________________________________________

 

 

 

EARLY ESPRESSO CARDSTOCK (119686 | $9.25)

EARLY ESPRESSO INK (147114 | $8.00)

CRUSHED CURRY CARDSTOCK (131199 | $9.25)

SOFT SUCCULENT CARDSTOCK (155776 | $9.25)

CAJUN CRAZE CARDSTOCK (119684 | $9.25)
HE'S ALL THAT BUNDLE (159079 | $45.00)

HE'S THE MAN SPECIALTY DSP (159068 | $15.00)

RUSTIC METALLIC ADHESIVE DOTS (159082 | $8.00)

Stampin Friends April 2022 Blog Hop - All About the Flowers!

Welcome to Stampin Friends Blog Hop! It is All about Flowers For Aprils Blog Hop!  We are getting ready here for the flower season are you?  After all, April showers bring May flowers!

 If you are following along the hop, you have arrived from Barb’s blog. Be sure to read through my blog, comment below and continue to Jo’s blog. If you get lost along the way, you can find a list of Blog Hoppers at the end of each Blog.

ENJOY!

I just love this time of year....the drabby winter months are slowly going away, making the way for sunshine and mother nature waking everything up again.  The trees are filling their branches, the grass is growing and most importantly, the flowers are blooming! So, with this we decided to focus on flowers for this blog.  My projects consist of another "gift set" that can be given as a birthday gift for spring time. Of course there is a greeting card, along with a small jar of loose leaf tea. I had a really fun time putting my projects together and hope you enjoy them.

For my projects I used a very new suite that will be in the NEW Stampin' Up! catalog which should be in hands by now!  If it is not, don't worry it will be there very soon!  The suite I used is called Hues of Happiness.  I just love how Stampin' Up! makes sure some of their DSP images can be die cut out with the coordinating die set!  When you have a busy month like I did, it makes it easy to create a master piece in no time at all!

Products Used: 

  Happiness Abounds Bundle

  Hues of Happiness 12" x 12" DSP

  Daffodil Delight Card Stock

  Rustic Metallic Adhesive-Backed Dots

Simple Card Instructions:

1. The card base is made with daffodil delight card stock.  I then layered a piece of DSP from Hues of Happiness.
2. For my next layer, I first die cut the velum with the texture die from the Blossoming Happiness Die Set.
3. On top pf the velum I adhered two strips of DSP (this paper is so beautiful, I wanted to show of as much of it as possible).
4. Lastly, I stamped the sentiment in black on basic white card stock and die cut out one of the larger flowers from the DSP, along with some leaves. I added a rustic metallic adhesive-back dot to the center of the flower.

Simple Gift Instructions:

I used a simple spice jar to hold my loose leaf tea and prettied it up using more of the Hues of Happiness DSP.

1.   The first thing I did is wrap a strip of DSP around the jar. Then I added a thin strip of daffodil delight card stock, which I die cut the top using the "note book" die from the Happiness Die Set. (Unfortunately, I just realized you can not see this in any of the pictures, but trust me it is so cute!)
2. I added the same flower and leaves from the card to cover up the seams. 
3. In the center of the flower I also added a rustic metallic adhesive-back dot. Just an FYI, just because the flower is cut off on the DSP, it can still be used.  The flower used here was on the edge of the DSP so no need to cut a whole flower in half to get the effect that I wanted!
4. I then added a smaller flower from the DSP to the top of the lid, along with more leaves.

I hope you enjoyed my All About Flowers card and project!  Don’t forget, comments of any kind (well hopefully nice ones, lol) are greatly appreciated. 

When you are done here be sure to hop on over to Jo’s Blog.
See you next month!

______________________________________________________________

BASIC WHITE CARDSTOCK (159276 | $9.75)
HAPPINESS ABOUNDS BUNDLE (158824 | $49.50)

HUES OF HAPPINESS 12X12 DSP (158822 | $12.00)
RUSTIC ADHESIVE-BACK DOTS (159082 | $8.00)

VELLUM CARDSTOCK (101856 | $10.00) 

  

Stampin' w/Tiziana April News 2022

Stampin w/Tiziana April 2022 News

It is really hard for me to tell you all that this year will be my last year as a Stampin’ Up! Demonstrator…I just don’t have the mojo to continue….APRIL FOOLS!!!! hahahahaha!!!!

I could never give up this side gig!!!!  I love you all too much!!!  However, it is time for some items to be retired from Stampin’ Up!’s catalog…so read on and you will see what will no longer be!

​

​April's Hostess Code​!!

Always looking for the hostess code?? Here’s a quicker way to be sure you are using the Hostesses code all the time when you want to place an order.  Just click this link https://www.stampinup.com?hostcode=737UPKSQ and it will automatically have you shopping under me with March’s Hostess Code.
 Be sure to use this code (737UPKSQ) in April at check out if your order is less than $150.
This will put you in the Hostess Rewards Raffle at the end of the month!
Speaking of Hostess Winner, Congratulations to Joanne H

(this time for real, last month it was actually Joanne M) for being March’s Hostess Code Winner!!
Happy Shopping!

Retiring/Last Chance List!

The 2021–2022 Annual Catalog will be retiring soon! It’s always bittersweet to see a classic Stampin’ Up! catalog take a trip to retirement. But, we’re looking forward to all the new products on their way—and we hope you are, too!
Stock up on your favorite products before they’re gone for good! Save up to 50% on essential craft supplies. What are you waiting for? Start shopping! After all, this selection of Last Chance Products is only available while supplies last. 

The best way to see what is on the last chance list is by going right to the Stampin’ Up! shopping site and selecting the “last chance” section.

 
​ 

Waves of the Ocean

Early release item from the new catalog

Waves of the Ocean Collection, a must have!  Each of the world’s wide and open oceans is brimming with beauty and wonder. Marvelous marine animals, miles of submerged mountain ranges, and unique underwater plants lie thousands of feet below Earth’s dry surface, encouraging exploration and awaiting discovery.
Discover the depths of the ocean—and your artistic abilities—with the Waves of the Ocean Collection! This coastal collection includes an inspiring set of stamps and detailed dies, both early-release products from the upcoming 2022–2023 Annual Catalog. Plus, a pack of paper made from images of hand-poured paint, blue-hued foil sheets for a sea of shine, and radiant rhinestones for a splash of sparkle—each an exclusive product you can only purchase during the promotion period!
Explore artistic expression with the Waves of the Ocean Collection. With these seaside supplies, you’ll dive into inspiration and swim in a sea of creativity!

​

All Together

Early release item from the new catalog

Loving hands and heartfelt words are the best way to show you care. With hand designs that illustrate coming together in friendship and solidarity, the All Together Collection will help you create cardmaking and paper crafting projects that reflect the people you know and love. 
The All Together Collection includes early-release products from the 2022–2023 Annual Catalog—an exciting new range of natural Stampin’ Blends—and exclusive products you can’t get anywhere else! Come together to create projects inspired by you. 

 

 

 New Kit Added

ROBOT BUDDIES KIDS CARD KIT (159336  |  $23)

The latest addition to the Kits Collection by Stampin’ Up! is a fun one! With the Robot Buddies Kit, configure cards featuring cute robots and robot themed images that kids will love. Combine your bandwidth to craft this kit together for some offline fun with these awesome, friendship-themed robots!
Our kit selection changes frequently. To see what kits we have available, please check the online store.

Details:

• Kit includes 9 card bases—3 each in 3 designs—and 9 envelopes
• Includes sticker sheets and printed die-cuts to decorate with
• Includes two Classic Stampin’ Ink Spots in Bermuda Bay and Pumpkin Pie
• Finished card size: 5-1/2" x 4-1/4" (14 x 10.8 cm)
• Coordinating colors: Balmy Blue, Bermuda Bay, Granny Apple Green, Night of Navy, Pumpkin Pie

​Say what???  A NEW Catalog!

With a new catalog brings NEW In Colors…check out the new In Colors for 2022 - 2024!

​April 10th - Last Call to sign up for Paper Pumpkin

April 10th is the last day to sign up for the Beyond the Horizon Paper Pumpkin Kit!
Growing through life can also mean growing pains. Whether they’re climbing their career ladder or moving out for the first time—change can be simultaneously thrilling and scary—but isn’t that what makes life beautiful? Because new beginnings, after all, are simply new adventures. Let your loved ones know you’ll be there to support them through all of life’s chapters! 
The Change is Beautiful kit contains enough supplies to create 9 stunning cards with a unique folding technique to commemorate moments of change. The designs are inspired by the natural cycles of change found in nature. 

Details:

• Number of projects: 9 cards; 3 each of 3 designs; 9 envelopes
• Change is Beautiful Photopolymer Stamp Set
• Melon Mambo Classic Stampin’ Spot®
• Printed card bases
• Printed envelopes
• Printed, shaped die cuts
• Iridescent sea glass
• Dimensionals

Watch the YouTube video here https://youtu.be/OS68TM89A4w

Card size: 4-1/4" x 5-1/2" (10.8 x 14 cm)
Coordinating Stampin’ Up! colors: Balmy Blue, Basic Black, Bermuda Bay, Crushed Curry, Evening Evergreen, Granny Apple Green, Melon Mambo
Sign up here!

 

​BREAK TIME!

So although I am not retiring…I am taking a small break this month from classes.  This is a busy month filled with many family events, so it is just easier to take a small break.  

Don’t you worry none, my card classes will be back in May and I am planning some fun events for May and June.  I am hoping to welcome back May Day Celebration, along with my annual Catalog Release Party!  Sooo, stay tuned!

________________________________________________________________________________
Let me know what types of classes you are looking for!
This year I would love to expand my class offerings.  If you are looking for particular classes, please let me know.  Things I do have in mind are the following:

• Christmas Cards every other month (great way to get them all done way before December)
• Seasonal Sampler Class
• Smash Books
• Scrapbook Layouts

Another idea is to do more large group events.  What are your thoughts?  Would you love to do full day events or weekend events, or both?  Your input is greatly appreciated!
________________________________________________________________________________

Have a wonderful April, see you in class in May.  
Oh and I will be here so please reach out with any questions you may have.

Stampin Friends March 2022 Blog Hop - Monochromatic March!

 Welcome to Stampin Friends Blog Hop! It is Monochromatic March! If you are following along the hop, you have arrived from Teri’s’s blog. Be sure to read through my blog, comment below and continue to Melissa’s blog. If you get lost along the way, you can find a list of Blog Hoppers at the end of each Blog.

So the color I decided to use, I guess isn’t really a color, lol, I picked Black.  I’ve also went back to using card sketches so that I can create a card and not CASE a card.  I know there is nothing wrong in CASEing, but it feels good being creative!  Funny thing about this month’s card and project…absolutely NO stampin’ involved…say what???! 

 

MATERIALS NEEDED:

Basic Black Cardstock

Basic White Cardstock
Whisper White Ink
All Together  6" X 6” Designer Series Paper
Here For You Dies
Brick & Mortar 3D Embossing Folder
White 3/4” Frayed Ribbon
Classic Matte Dots
Pendant Kit

Today more than ever our friends, family and even strangers need to know we are here for them.  So I used this months Blog to showcase a gift set that can be given to someone going through a hard time.

The card is letting the receiver know, I am here for them.  The card sketch I used is
by Julie Tilman.  I thought this would be perfect to show off the different patterns of DSP found in the All Together 6”x6” pack, along with using the main focal piece of DSP, “pinky square”.  Here are some simple instructions.

1. Card base is basic white cardstock, 8 1/2” x 5 1/2”, folded in half to become 4 1/4” x 5 1/2”.
2. The first layer is 4” x 5 1/4” basic black yardstick which I dry embossed using the 3D folder Brick & Mortar.  I think dragged the whisper white ink pad across the top.  This left the white ink on the raised “bricks”.
3. The second layer is a piece of White Frayed ribbon (4 3/4”) banner cut at both ends.
4. I used two different DSP patterns from the All Together pack, the diamond pattern is 2 1/4” x 3 3/4” adhered to the card base with dimensionals vertically.  The next layer is the “pinky swear” pattern (3” x 2 1/2”).
5. For my sentiment I used the die cut “here for you”.  I was so excited that this phrase, once die cut stays together!!  This makes adhering it super easy!
6. Lastly, I added three white classic matte dots to the lower right hand corner.

To go along with the card, I created a simple piece of jewelry, a pendant necklace.  I think these pendant kits are just amazing.  You can customize and personalize these to suit anyone and any theme!  So, to let the person know I am here for them always, I created a pendant that they can wear.  The DSP I used is the “pinky swear” and my packaging was really easy to make.  To make the necklace holder, I layered a 3” x 3” piece of DSP on top of a piece of 3 1/4” x 3 1/4” of basic black cardstock.  I punched two 1/16” holes at the top about an inch in from either side and an half inch from the top.  Then I cut a slit from the top to the holes that I punched.  This will hold the necklace cord in place. Now, I can slip this into a jewelry bag or a small burlap bag.  How easy and awesome is this!

I hope you enjoyed my monochromatic March card and project!  Don’t forget, comments of any kind (well hopefully nice ones, lol) are greatly appreciated. When you are done here be sure to hop on over to Melissa’s Blog.
See you next month!

___________________________________________________________________

BASIC BLACK 8-1/2" X 11" CARDSTOCK (121045  |  $8.75)
WHITE 3/4" (1.9 CM) FRAYED RIBBON (158138  |  $7.50)
UNINKED STAMPIN’ PAD & WHISPER WHITE REFILL  (147277  |  $9.50)
BASIC WHITE CARDSTOCK (159276 | $9.75)
ALL TOGETHER 6" X 6" DSP (160039  |  $11.50)
HERE TOGETHER BUNDLE (160263  |  $48.50)
CLASSIC MATTE DOTS (158146  |  $7.00)
BRICK & MORTAR 3D EMBOSSING FOLDER (149643  |  $10.00)